FFi logo
Site Presented By: worldfuelpm1
Join Now language icon
VAT Mode:
Environmental Evaluation

The following Environmental Study (July 2007**) references the “user friendly and environmental safety” associated with the following Chemical Products:

  • Carpet & Upholstery Cleaner (141),
  • Leather & Vinyl Cleaner (122),
  • Tire Shine Water Base (120)
  • Bumper & Trim (123)
  • Odor free (150)
  • Metal Polish
  1. Must be free of any known human carcinogens, mutagens or teratogens.

    Contains no known or suspected carcinogen, mutates, teratogens.

  2. Must not contain compounds or substances, which cause or contribute to the creation of atmospheric greenhouse gases, ground level smog or ozone depletion.

    Does not contain any fluorinated or chlorinated hydrocarbons.

  3. Must not be corrosive to skin or inanimate surfaces.

    The pH is not considered corrosive to skin or inanimate objects.

  4. Must not be delivered in single use aerosol cans or cans using ozone depleting propellants.

    It is not delivered in single use cans or harmful ozone depleting propellant aerosols.

  5. Must not contain heavy metals (such as mercury, lead, cadmium, chromium, etc.) that are toxic to humans, animal life or the environment.

    Does not contain any heavy metals.

  6. Must not contain petroleum distillates unless no natural alternative is available, and then only if the distillate meets the human safety and environmental profile outlined herein.

    Distillate meets the human safety and environmental profile for user friendly petroleum-based hydrocarbons.

  7. Should not be combustible below 150ºF.

    There is no flash point up to 150 F.

  8. Must not contain chlorine, chlorinated or brominated solvents.

    Does not contain any of those compounds.

  9. Must not contain compounds that persist or bio-accumulate in human or animal tissue or in the environment.

    Does not contain any of those compounds.

  10. Must not contain volatile organic compounds (VOC) at levels exceeding the limits established by the USEPA, Florida or California Air Quality Management District Resources Board for the applicable product categories. Products must not be listed on the hazardous air pollutants list of the Environmental Protection Agency.

    The product is VOC compliant.

  11. Should be readily biodegradable at greater than 90% in thirty days without the need of being run through a municipal effluent treatment process. If not biodegradable due to inorganic content the ingredient must be chemically inert.

    The product is biodegradable and or chemically inert after application.

  12. Should be obtained or derived from replenishable natural (plant) sources wherever possible.

    Yes (Proprietary Sources).

  13. Should be as concentrated as possible to green the supply chain.

    The product is ready to use.

  14. Products should be capable of being dispensed through automatic systems in order to reduce user and environmental contact.

    It is a consumer use product.

  15. Should have a pH level between 4 and 9 wherever possible.
The pH level is 4.0 - 8.4 and generally is 7.0 – 7.8   pH (non-corrosive).
Anthony M. Malatino, Chemist, CHMS, an Independent Consultant Contractor
**July 25, 2007...Advanced Certified Environmental, LLC...